1. Conveyor Design and Configuration
Prioritize shaftless screw conveyor designs when selecting the equipment. Rock wool fibers are highly prone to wrapping around the central shaft and intermediate hanger bearings. Conventional shafted screw conveyors equipped with hanger bearings are therefore more susceptible to material buildup, clogging, and blockages.
For long conveying distances or materials with a high fiber content, a shaftless screw conveyor is generally the preferred option. For short-distance conveying involving mostly dust and fewer fibers, a fully enclosed tubular shafted screw conveyor may be suitable. U-trough designs are ideal for applications requiring easy access for inspection and cleaning, but they should be equipped with properly sealed covers to prevent dust from escaping.
2. Sealing and Dust Control
The entire conveyor should feature a fully enclosed structure. Continuous sealing gaskets should be installed at flange connections to minimize dust leakage.
A combination shaft-sealing arrangement should be used at the shaft ends to prevent fine dust from entering the bearings while also stopping dust from escaping into the surrounding environment.
The inlet and discharge ports should be equipped with connections compatible with dust extraction systems, allowing easy integration with the plant's dust collection ductwork and helping meet workshop environmental requirements.
Bearing housings should be isolated from the conveying chamber to prevent dust from entering lubrication areas and compromising bearing lubrication.
https://www.machinetailor.com/factory-automation-system/rock-wool-dust-spiral-conveyor.html
3. Wear-Resistant Materials
The conveyor housing and screw flights should receive appropriate wear-resistant treatment.
The screw flights can be surface-hardened or fitted with additional wear-resistant coatings. For shaftless models, replaceable wear liners should be installed inside the trough. When the liners become worn, they can be replaced individually without replacing the entire conveyor.
Standard carbon steel is generally suitable for dry, ambient-temperature operating conditions. For applications involving moisture or mildly corrosive materials, stainless steel construction is a more appropriate choice.
4. Feeding and Anti-Bridging Design
The inlet should be designed to match the discharge arrangement of the upstream dust collection equipment. An adequately sized feed opening provides sufficient space for material entry and helps prevent rock wool fibers from bridging and blocking the inlet.
An anti-bridging device can be specified to prevent material buildup and ensure consistent feeding.
The screw pitch and rotational speed should be selected according to the flow characteristics of the rock wool material. Low-speed operation is generally recommended to reduce fiber entanglement and component wear.
5. Drive System and Protection
The drive system should provide sufficient torque capacity with an adequate safety margin. Rock wool fibers can easily become entangled and jam the conveyor, potentially causing the drive to stall.
Variable-frequency drive (VFD) control is recommended because it allows operators to adjust the conveying speed and output to accommodate fluctuations in the production line.
The conveyor should be equipped with overload protection and blockage alarms. If material becomes jammed, the system should stop promptly to prevent damage to the motor and gearbox.
A heavy-duty gearbox is recommended to withstand the impact loads associated with intermittent fiber entanglement and material blockages.
6. Ease of Inspection and Maintenance
The conveyor should incorporate inspection openings and quick-release access covers, allowing operators to check for internal fiber buildup, wear, and other operating issues during routine maintenance.
Wear parts should follow standardized designs so that components such as wear liners and sealing elements can be purchased and replaced individually.
For long-distance conveying applications, minimize the number of intermediate support points wherever possible. This helps reduce the use of components such as hanger bearings, which are particularly susceptible to fiber buildup and entanglement.
7. Matching the Operating Conditions
Confirm the required conveying angle before purchasing. As the inclination angle increases, material is more likely to accumulate or slide backward inside the conveyor. For fibrous materials such as rock wool, steep-angle conveying should generally be avoided.
Check the available installation space, conveyor length, and inlet and discharge orientations to ensure compatibility with the existing production line.
Pay close attention to material moisture content. Moisture-affected rock wool can form clumps and adhere to the conveyor walls, reducing conveying efficiency. The manufacturer should adjust the conveyor structure and configuration to suit the actual material conditions.
8. Safety and Supporting Equipment
The conveyor should have complete safety guards, with appropriate protective covers or guardrails around rotating components to prevent accidental contact.
Electrical components must be selected according to the workshop's explosion-protection requirements. Where combustible dust is present, the motor, electrical controls, and related components must have suitable explosion-protection ratings for the specified hazardous area.
Before placing an order, confirm that the supplier can provide the necessary technical drawings, spare parts lists, and installation instructions to support equipment installation, commissioning, and future maintenance.


